• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum and timber.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation you'll need to find some plastic spacers that will assist the new pane to fit properly into the frame of the window.

If you plan to try to remove the glass panes yourself, it is essential to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth prior to when you start working on the glass, so that any shards fall onto the fabric rather than on the floor, where they could be trodden under and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will keep drafts and water from entering your property until a professional comes out to fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap between the door and the window is substantial, you may prefer a security screen that also includes windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a number of problems, including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. It's important to take action when you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows to access the frame. After that, using a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity with time, Upvc Window Repair which causes them to loosen. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is typically caused by screws that have become undone over time, but it could also be due to the handle mechanism wears out. It's relatively simple to fix a loose upvc window repair hand. The first step is to close the window and then perform a test fit. The corners of the sash need to align with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature within your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a simple fix that can be completed by any DIYer who is competent. Depending on how severe the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be fixed by an uPVC window repair specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it opens in a breeze. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It is essentially a simple process but it can be easier to do with someone else to help you hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to provide suggestions.

Regular lubrication of hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. Ideally, you should perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. Firstly the hinges, again because of wear and tear, may become displaced, which will cause gaps to develop where the sash meets the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it might be necessary to have them realigned or replaced. Second, the interlock can also become misaligned. This happens on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

The seals may wear out or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach the point when it's more cost-effective to replace them rather than fix them. So, if you are having issues with your upvc windows, it's recommended to seek help from a professional as soon as you can.