• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement Handles For UPVC Windows

UPVC window handles come in various styles but all use the same locking mechanism. To replace a uPVC window handle, you must remove the top screw located at the base of the handle. This will reveal two additional screws.

Next, measure the spindle length to ensure the new handle is a good replacement. It is essential to know the type of handle you currently have because there are a variety of sizes.

Inline Espagnolette Handles

Espagnolette handles are found on the majority of modern double-glazed windows and operate multi-point locks which provide greater security. They work by using a 7mm square spindle at the back of the handle, which connects with a gearbox inside the window frame, which turns multi-locks when turned. They are available in a variety comprising cranked, inline key locking and cockspur handles and they are also available as a set to replace a single handle that is damaged or worn out.

Our uPVC replacement handle kits are designed to make it easy to replace a damaged or broken espagnolette window handle. These uPVC handles come with all the necessary fixing screws and a variety of spindle sizes to suit all applications. They also come with key plugs that allow them to be changed from the standard open/close handle to the egress and fire escape locking handles (if utilized in conjunction with the appropriate key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another alternative is our Yale Sparta 2 Inline Espag Handle that was created to have minimal aesthetic intrusion by having a lower base. It is part of the appropriate range of hardware and comes in a range of finishes all of which comply with the requirements of BS EN 1670:2007 Grade 5 corrosion resistance. They have also been tested for durability and are suitable for use in coastal environments as well as with acidic timbers. They also work with cylinder immobiliser inserts that allow you to obtain key-locking status if this is required.

Cockspur Handles

Cockspur handles, typically found on older uPVC or aluminium windows and doors They are a simple latch-and-catch arrangement. The handle's nose is affixed to or put into the catch, which is a wedge block of plastic mounted on the window frame. The wedges are available in different sizes, so it is crucial to determine the size of step you need prior to purchasing the replacement handle. Generally, uPVC frames have a handle step of 9mm and aluminium frames tend to use 21mm as the step size.

The cockspur handle is lockable with a key, providing security to your home. The lock is put into the handle by a spindle, which fits into the handle via the lock hole (also known as a backset). The spindle is 7mm square and can be used to open or close the window.

If you are replacing a handle for a cockspur, it is important to make sure that it has the same height of step as the original. Usually, this is measured from the base of the spur on the handle to the underside of the nose of the handle. This measurement is often referred to as the stack height or backset and it is essential that you know this before you purchase the handle.

Cockspur handles are available in straight/universal or cranked, and are available in left hand or right handed versions. This is to allow the handles to be positioned on windows that open to the left or right and also to allow the user a better access to the window.

It is crucial to determine whether or not your window needs a restrictor designed to stop the handle being opened past a certain level. These are usually required for high-rise apartments or commercial buildings for safety reasons. However, most domestic homes do not require these.

There are a variety of styles and colors of cockspur handles including white uPVC and brushed steel. The ideal cockspur handle for your windows depends on your personal style and taste as well as how you want the window to function.

Tilt and Turn Handles

The UK is home to a variety of double-glazed windows with tilt and turn handles. Both upvc windows and timber ones come with them. The handle can be rotated at any angle, replacement handles for upvc windows even 180 degrees. This allows the window to be opened fully into the room and can also drop down to allow for ventilation. The handle is locked in this position, which requires a key to unlock the handle if needed to open it.

This kind of handle can be easily replaced since it has only one large handle, not a number of smaller ones. This makes it less obvious the handle and is more in line with contemporary minimalist design trends. They are also easier to clean since they are able to open inwards.

Another benefit of tilt and turn windows is that they are 4 to 8 times stronger than casement windows. This makes them ideal for larger windows and doors. The frames also feature a steel core which increases the durability and strength.

The tilt-and-turn mechanism is also more secure than a casement because the handle is locked in any position. This is especially important in areas with children because it stops them from accidentally opening a window.

Tilt and turn windows replacement are a popular choice for many homes, as they can be used in many ways. They can be opened horizontally as a normal window or lowered to the style of a hopper. This is a great choice for those who wish to increase airflow and reduce noise in their home. They are also easy to clean and maintain, because the glass is easily removed. They are available in a variety of sizes and colors. They are ideal for any type of home and complement both modern and traditional styles.

Crank Handles

Crank handles require minimal effort to open, and provide a stunning view of the outside without obstructing the glass. These handles are commonly used on casement windows hinged on the sides or awning windows. They come with a mechanism that is similar to a window bar and linkage arm, which supports the window sash. The window sash is opened or closed when you turn the handle clockwise. In contrast to other types of handles that are geared towards windows, a crank window's mechanism and handle are subject to a significant amount of wear and tear that can cause the gears to strip and the handle to stop working or fall off of the operator shaft. By inspecting the crank handle and the mechanism of the operator regularly will ensure that they are in good shape for many years to come.

A crank handle consists of an electronic arm that is connected to a rotating shaft that is perpendicular. The handle is rotated in a circular motion by grasping it and rotating it, similar to how you would operate a sharpener. In certain instances, the handle can be operated by the leg.

The base of the crank handle is hollow. It's this hollow that allows it to connect to equipment and machinery. The handle's arm also includes a connecting rod which converts the circular motion the handle into rotary or reciprocating motion that operates equipment and machines.

In addition to adjusting equipment and machinery The crank handles are also commonly employed on boats to assist them be loaded onto trailers. They are typically made of stainless steel which is resistant to corrosion in marine environments. This is why the majority of boat crank handles are powder coated to shield them from rust and to make them easier to clean.

Replace the crank handle in the event that it ceases to function or does not allow you to open the window. Before doing so check for the trim mounting screws within the window frame's track for screen. If there aren't any then you can use a strong putty blade to open the cover by sliding it between window jambs and the frame. If that doesn't work, you can remove it and access the crank by unbolting screws in the window frame.