• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handles are easy to install and feel like good quality. But it's important to understand that the kind of handle you select is the one that's right for your window.

The primary factor is the step height which refers to the gap beneath the nose of the handle to the frame or base. Other considerations include lockable mechanisms and designs.

Replacement parts

There is a broad selection of replacement upvc window handles available for purchase. There are numerous designs and colors to pick from, so you're sure to find something that is compatible with your existing windows. It's easy to impulse buy especially when the handle is damaged, therefore it's a good idea to be patient and examine certain things prior to committing to buying a replacement. First, you must be aware of the type of upvc handles you own and what the differences are between them. The table below lists the most commonly used handles to help you choose the one that will match your window.

Most double-glazed windows today come with epag handles. They are typically attached to the frame by two screws that screw into the frame from both sides.

They have a spindle bar on the back that can be a variety of sizes, and this will determine how they work (either left or right handed). This is the reason it's crucial to take a measurement of the handle you have to ensure that you're ordering the correct replacement.

Usually fixed with two bolts, similar to the Espag handle, but they have a lower projection from the frame, which means that the arm will not penetrate your blinds. This is a great option for those who want the handle to blend in with your blinds and have upvc windows.

Cockspur handles are similar to Espag handles, but they have a nose which closes over a wedge that sits on the frame of the window. This type of handle is often found on older windows made of upvc as well as some wooden windows.

On casement windows tilt and turn handles are operated by turning the handle or pressing the top of the window. This lets you open the window from inside and clean it from outside without having to climb a ladder or step across the fence. They are also an excellent option for people with restricted mobility. They are an excellent method to improve security and accessibility at home.

Tips and hints

There are a variety of different kinds of uPVC window handles, and a lot of people will have to replace them at some moment. If this occurs it's a good idea to know a few tips and tips that can assist in making the task be as smooth as it can.

Check what type of handle is in your home. Depending on the type of handle is connected to and the locking mechanism it uses it might be necessary to replace the entire handle and lock. If the roller cams and shoot bolts (espags) are stuck or are seizing up, you'll have to replace them, along with the handle.

Thankfully, the majority of uPVC handles adhere to industry standards and are very alike. This makes replacing them an simple task. The first step is to remove the screw covers from the handles, usually pozi-drive screws. After the screws have been removed, you will be able to remove the handle.

It's a great idea to take note of how far the spindle sticks out from the base of your handle when you remove it. This will allow you to determine the length of the spindle for a replacement handle. To do this, simply take a measurement of the square peg sticking out from the base of the handle and use it as a reference.

This is particularly important for inline uPVC windows handles, as they are always straight and will only open to the left or right. They won't work in the middle. It is a good idea if you are not sure what kind of handle you have in your home to borrow a handle and see how it functions.

You can also determine the hands of a uPVC window by observing how the handle rotates when it is used. Handles can be turned either clockwise or counter-clockwise. If you're not sure it's possible to have someone else open the window with the handle and figure out how it operates in that way.

Find the spindle's measurement.

It can be difficult to choose the appropriate replacement handle for your window as there aren't all handles that have the same size. The spindle is what controls the locking mechanism inside the window and it is important that when you fit the new handle that you measure the length of the spindle precisely to ensure it fits. There are many different types of uPVC handles that operate in different ways. It is crucial to know which type you have and the locking system you have.

The spindle of the Espag handle is a part that extends from the rear of the handle, and is inserted into the lock gearbox within the window frame. When you turn the handle, this will turn the lock inside the gearbox to open the window. They are used on uPVC windows with casement. They can be locked using keys to increase security.

Cockspur handles are typically found in older double-glazed uPVC window frames. They have a "nose" that is secured by a wedge-shaped striker block. They are also fairly simple to use and can be locked using keys. It can be more difficult to replace these handles because they are less common than the espagnolette handles.

If you have a tilt-and-turn uPVC, you will require a replacement handle with an alternative locking system. The handle can tilt the window, and allow it to rotate around to fully open it. You will need to make sure that the handle you pick has a spindle size at least 55mm, or it won't be able to get into the window frame.

You can follow the same method to take off and replace upvc window handle this kind of uPVC handle, but you'll need to be cautious when removing the old one. You may have to open the window a bit larger than normal to ensure you get to both screws fixing it to the frame. After you have installed your new uPVC handle and ensured that it is in the correct position, you can tighten the screws, and test the lock to confirm that it works correctly.

Fit the new handle

Once you have the correct replacement handle, it will simply screw into place. This will require a screwdriver and might be easier using an electric one. When screwing, it is crucial not to over tighten the screws as this could cause the handle to crack or warp.

The second step in fitting the new handle is to put in the spindle. The spindle is the part that runs through the handle and operates the locking mechanism in the window. It is essential that the part is fitted correctly to allow the window to be opened and shut securely.

There are many different kinds of uPVC window handles. These include:

Espagnolette Handles - These are handles that are inline and can be used on tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle, but have a curved design that is useful for windows in difficult-to-access locations.

Tilt and turn handles These are used to operate the opening and closing mechanisms when tilting and turn. They also move windows.

The majority of uPVC window frames are fitted with these. They are commonly called 'Bay Windows in the UK.

If your uPVC window handle is damaged, it can be extremely frustrating. However, there is no need to replace the entire uPVC window because of a broken handle. There are several easy ways to fix and replace window glass near me a damaged uPVC window handle.

Fixing your broken window handle swiftly by identifying the type and measuring the spindle. It is essential to take your time and prioritise security when working with windows and Replace Window handle tools but this is a relatively straightforward task. It could be the difference between a safe and secure home, or having a window that can be easily opened. If you have any concerns or would like to speak to a professional about replacing your window handle, call Bridgewater Glass. We have a team of experienced and knowledgeable professionals who are able to help with any issues you might be having.