• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism started to fail? Perhaps the door or window handles aren't aligned correctly or are difficult to use.

It's important that the double glazed doors function smoothly, or else you'll be wasting energy and increase the likelihood of burglary. Owen the Locksmith can fix your door lock for a reasonable price.

Snapped Key

When a key snaps off inside a lock, it can be incredibly difficult. It can also be a security problem, as it may make you vulnerable to an intruder if the door does not lock. There are fortunately simple fixes you can attempt to fix the issue and get your door working properly once more.

Remember to remain calm. If you panic you may end up pushing the broken key piece further into the lock.

Spray WD-40, or another penetrating lubricant, into the lock. This will assist the broken piece to be removed more easily. You can also use the screwdriver to break off any pieces that are stuck. If you're lucky enough to have a small piece of the key left hanging out and you want to remove it, use a paperclip or some other thin metal object to grab it and then pull it out. Both methods work well, however, be very careful not to push the broken piece of the key further into the keyway.

Some paperclips have grooved edges, which can work in a pinch to extract hooks and some Jigsaw blades can also be used for this purpose. If you don't happen to have any of these items, you can bend a hook using needle-nosed pliers. Additionally, you can use a pair of tweezers grab and remove the last piece of broken keys.

If you are unable remove the broken key piece, use a lock deicer. It is available at most hardware stores, and it is used to freeze any water or ice that could be inside the lock.

If none of these solutions seem to work, it might be time to contact a locksmith. Fitlocks specialists are able to quickly solve problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also reconfigure the double glazing repairs glazing door mechanisms so that they are more easy to use. Get a double glazing repair with us online or give us a call to discuss your needs.

Broken Cylinder

A damaged cylinder can pose an extremely risky security issue. It's fortunately a simple repair for professional locksmiths to complete. A locksmith will have to tap the cylinder to fix it. This can be accomplished with the hammer or other tool. The best method is to make use of a wire or a long match. Place the match or wire's end close to the keyway. The locksmith will then hit the lock to break it. This is much better than using a hammer that can cause damage to the lock.

The most common cause of cracks in the cylinder head is overheating. This can occur when the block and cylinder head are made of different metals such as cast-iron and aluminum. When different metals heat up and cool down at different rates, it can cause localised hotspots that expand faster than the rest of the cylinder head, fitted thus leading to cracks.

Another possible cause of cracks in the cylinder is corrosion. If the cylinder block and head are not maintained correctly, they can rust or corrode and cause them to expand more than expected. In time, this could also lead to cracks.

If your uPVC window lock or door is stiff or requires an enormous amount of pressure to turn, this can be the result of a number of things. A defective locking mechanism, misalignment or fitted the wear of the handle are typical reasons for this issue.

This is a straightforward and inexpensive fix that most double glazing owners can do. A professional locksmith will typically be able to solve this issue within a matter of hours of arriving at your property. They can replace the locking mechanisms, or replace the window handles and replace the gearboxes, based on your particular requirements. A skilled locksmith will always be able to provide you with a recommendation of the most cost-effective option for your home. They can also suggest upgrades to the highest-security 3 Star euro cylinders TS007 that add an extra layer of protection against burglars. This is a small price to pay for the peace of mind that comes from knowing your uPVC doors are secure.

Broken Handle

It's not a surprise that window handle locks can break. They have complex mechanisms which deteriorate over time. It isn't always easy to pinpoint the reason for a broken window handle lock and fix it correctly.

Fixing your broken handle, regardless of whether it's the internal locking mechanism or latch will increase the security of your uPVC door and reduce the risk of draughts. It could be costly to replace or repair your handle incorrectly and it can also damage the frame and the lock of your door.

With the window in the open position then loosen the screw that secures the handle by using a screwdriver. The screw should be on the inside of the backplate, usually covered by the cap of the screw for aesthetic purposes. Be sure to not lose any internal components within the handle, for example the levers or plates on the opposite side of the spindle. Keep them in the same order so that it is simpler to replace them in the event of a need.

Next, turn the handle to make it 90 degrees to the window frame. Finally, loosen the screw on the back of the handle which holds it to the internal spindle with another screwdriver. Once this is released, you'll be in a position to pull the handle off and take off the damaged spindle. Replace it with a new spindle, ensuring it's the same length (you can purchase them online or in hardware stores). Securely screw it in place. Be careful not to tighten too much as this could cause damage to the handle or the window frame.

Ensure the new handle is correctly fitted Close the window and test the handle. The hope is that it will function smoothly and you'll be able to open your window once more.

Make sure to check that your uPVC window is shut correctly while you're working with the handle. If they aren't closing properly, you may experience damp or draughts inside your home. Also, you could be compromising the energy efficiency of your home. A local window company, such as Core Sash Windows, will be capable of adjusting the hinges on your window frames so they can shut properly.

Broken Spindle

It is more common for the spindle to break than the handle. This is especially typical in uPVC tilt and turn windows. These windows require a handle that operates a locking device in the window frame. The handle is connected to a central rod which activates locks that are shaped like mushrooms and lock into the window frame keep. If the dead latch mechanism is not able to open when the handle is turned it is possible that the spindle has been damaged This can be a very frustrating issue.

There are ways to fix this problem. A good locksmith can quickly and effectively address this issue. A good locksmith will be able disassemble the window's handle using a tool to remove the wheel portion where the spindle is located. This can be done without damaging the handle or causing any other damage to the window frame.

After removing the wheel the technician can examine the spindle to determine the cause of the break. This involves disassembling the spindle and inspecting each component part, noting any wear or damage. This process is usually carried out by technicians in an environment that is clean.

The next step is to clean the damaged spindle. This assists in removing any dirt or other debris that might be hindering its normal operation. The spindle could be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is the same size to the original. The technician will then drill holes that are identical to both pieces. This will ensure that the spindle is perfectly matched with the handle.

If the spindle that is damaged is beyond repair, it may be necessary to replace it completely. Home centres sell generic substitutes however if your window design is unusual you'll have to speak with an expert in woodworking or cabinet making who can recreate the exact piece. Once the new spindle is in place it can be fitted to the handle by lining up the screw holes in the handle with the frames existing screws. Once the new handle is seated you will be ready to operate your uPVC window.