• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace, and they will usually fit into the old frames very easily. However If you have double-pane windows that are held in place by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this instance you'll need find some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.

If you are going attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled.

It's a good idea to seal the gap after the glass is removed. This will keep drafts and water from entering your property until a professional is able to repair the window. It also acts as a barrier, UPVC window repairs deterring any intruders from gaining entry into your home. If the distance between the door and the window is substantial, you may need to consider an alarm system that includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. If you find that your upvc repair window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to open the windows to reach the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you are happy with the size of the window, tighten the screws to secure them in place.

If you are unable to move the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. The majority of the time this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and perform an initial test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on how severe the issue is, the old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal rather than the frame. This can be easily repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease it could be hinges at fault. These are easily replaced by any competent DIYer and can be done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier to do if you have someone to help you hold the frame up.

It is also important to ensure that the upvc window repairs hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this shows which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain way or due to inadequate installation at the factory. Sending us a picture via our website will often solve the issue. We are always happy to provide suggestions.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the possibility of sticking. It is recommended to do this once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. First, the hinges due to wear and tear could become misaligned. This will cause an opening to appear where the sash meets the frame. If they are beyond repair, it might be necessary to get them re-aligned. In addition, the interlock could also become unbalanced. This is located on the hinge side and may need to be cleaned. In some cases it might be necessary to replace these.

The next common reason for draughts are the window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a life span and they may reach a point where it is more efficient to replace them than fix them. So, if you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.