• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like timber and aluminum.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. However when you have double pane windows that are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this situation, you will need to source some plastic spacers that help the new pane to fit properly into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and repair the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues, including sliding. A sagging window in upvc repair could cause issues with light, draughts, and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loose their elasticity. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. This is usually due to screws that have loosened over time, but it could be caused by the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to close the window and then perform a test fitting. The joint at the corner of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to take action if you awake each day to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the problem the old caulking might need to be removed before a new layer of caulk is applied. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with ease, it may be hinges at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's very simple to change the hinges on a window however it is easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrow on each hinge. This shows which way the window should be opened.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us photos through our website can often resolve the problem. We are always happy to offer assistance.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges can also become unbalanced due to wear, creating an opening between the frame and sash. If they are damaged beyond repair, it might be required to realign them. Second, the interlock can also become misaligned. It is located on the hinge side and uPVC window repairs could require to be cleaned. In certain instances it might be necessary to replace the hinges.

The next common reason for draughts is window seals. They can become worn down or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures, and also lessen draughts.

The last way to reduce draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for UPVC Window Repairs your home. However, it is important to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than repair them. If you encounter any issues with your Upvc window it is recommended to speak with an expert immediately.