• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Installation

Add a ghost immobiliser your car and protect it from thieves. Our TASSA-certified system is safe from key cloning, hacking, and bypassing the vehicle immobiliser.

The system is hidden in your vehicle's wiring loom, so it is completely inaccessible to anyone looking. It operates by creating pin code push sequences through buttons already present on the steering wheel, door cards, and the centre console.

No circuit cuts

A car is a valuable possession that you spend many years of effort to acquire, so it's understandable why owners want to safeguard their vehicle against theft. But, traditional security systems such as alarms and wheel locks can easily be snatched away or bypassed by thieves. Ghost immobilisers on the other hand, is a highly effective solution that is silent and cannot be detected by modern thieves.

A ghost immobiliser, also known as a hidden device, is a device that connects to your vehicle's data network CAN to shut off the engine. It does this without key fobs or radio frequencies. It communicates with the ECU of your vehicle by using buttons on the dash, steering wheel and door panels. This creates an unique pincode only available to you. The code can be changed at any point and can be up to 20 digits long depending on your preference. It also comes with a secure emergency code that you can utilize if you forget your PIN.

The ghost immobiliser can also be used to prevent relay boxes from transferring the car key's signal within your home, which will unlock the doors and then start the vehicle. It can even block new high-tech methods of stealing your vehicle, such as OBD port hacking. The device is tiny, weatherproof and difficult to see. It's also hard to tamper.

The ghost immobiliser birmingham immobiliser also has an advantage: it is able to be fitted to your vehicle without leaving permanent marks. It is ideal for people who are planning to sell their vehicle in the near future. It's also much quicker and simpler to install than a factory-fitted system.

The autowatch ghost immobiliser fitting (Read the Full Piece of writing) Ghost, a cutting-edge new-generation device, prevents thefts of cars using contactless technology by connecting to a vehicle's CAN network and using the existing buttons to generate an unique PIN code. It is a discreet device that can be put in without cutting wires and does not require any additional key fobs. It is also connected to the original ECU of the vehicle, thus preventing thieves from bypassing it with a new key. This system has been verified by TASSA and is able to be linked to an International Security Register. Owners can rest assured, knowing that their vehicle is secured from theft.

No scanning by RF

You'll want to secure your vehicle from theft if you have spent a lot of money and effort to customize it. Installing an immobiliser is one of the best ways to stop theft. It will prevent your vehicle from beginning until you enter a unique code. Using the buttons on your steering wheel and dashboard, you can generate an apex of 20 digits long that is only known to you, ensuring that only you have access to your vehicle. It is also possible to set up a service and valet mode, which allows you to start your car for a short period without entering the PIN. This allows your technician to work on your car without you being there. This is a fantastic feature for those looking to save time and make their lives simpler.

Ghost immobilisers, a new generation device connects to the CAN data network of your vehicle. It uses buttons on the dashboard and the steering wheel to set a PIN number. It is designed to be discrete without any light or sound to give it away, and can be fitted anywhere on the vehicle, without affecting the appearance of your prized possession.

This stealthy system has been approved by TASSA and could lower the cost of insurance. It also comes with a tracking function that allows you to locate your vehicle even if it has been stolen. This is helpful if you have a rare or expensive vehicle that you've spent lots of time personalising.

The Autowatch Ghost can be used in conjunction with an iPhone application to allow you to start your vehicle remotely if you have forgotten your PIN or are unable to get into the vehicle due to a reason. This feature is great for when you have to take your kids to school or run errands, but don't want to put yourself at risk by letting the safety of someone else driving your car. This feature is beneficial if you have to take your vehicle in to be repaired or serviced.

The Ghost has the advantage that it doesn't transmit or detect radio frequency which means it's not detected by thieves using RF scanning and code grabbing technologies. It can also protect your car from key copying and ECU swapping, which are the most common methods used to steal cars.

No key cloning

Ghost immobilisers are a great option for protecting high-end automobiles and are designed to stop key cloning. They prevent your vehicle from being started without a PIN code being entered with the regular key fob. This makes it very difficult for thieves to steal the vehicle, and can discourage them from trying. This is a great option if you've invested lots of time and Autowatch Ghost Immobiliser Fitting money personalising your vehicle or have a unique or expensive model.

These immobilisers are linked to the vehicle's CAN data network onboard and are completely hidden, meaning that their presence is not evident. The device is also difficult to spot using radio frequency scanning technology or autowatch ghost immobiliser fitting code grabbing. This means that a criminal will have to spend much longer in order to get your vehicle.

To get around the system, a thief must be aware of the unique pin code and the location of the Ghost. The pin code is specific to you and may be changed as many times as you want. The pin code is easy for you to remember but mathematically unattainable for someone else to work out. The engineer will also provide an emergency pin code in case you forget your pin.

The Ghost CAN bus immobiliser is weatherproof and can be installed in any area of your vehicle. It is compatible with any vehicle and can be completely customized to match your car's look. It is also affordable and simple to use. You can even transfer the device to another vehicle if you switch vehicles during the course of ownership, providing that the new vehicle is compatible with it.

The immobiliser on the CAN bus is compatible with a number of other security features. It can, for example detect damage to the vehicle and notify the owner. It can also shut off the engine in the event that the vehicle is being manipulated. The system also protects your vehicle from key cloning and hacking. It can also detect vibrations or contact with the vehicle. It can also alert the owner if the vehicle is moving.

No OBD port hacking

Ghost employs an immobiliser that is hidden and connected to the CAN data network of your vehicle which prevents a thief from gaining access to your vehicle to disable the alarm, deactivate the key fob, and then code new keys. This technology is an improvement over the old methods used by thieves to steal vehicles in the past. The CAN data networks also means that your system will not be affected when you disconnect or change your battery.

The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that protects against key-cloning, hacking, and theft of replica cars. It does not utilize LED indicators or key-fobs. Instead, it utilizes the buttons on your steering wheel, console, and door panels.

Modern thieves can utilize diagnostics to identify circuit breaks on your vehicle. They can bypass immobilisers that require a lot wiring or are integrated in the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be detected by professional diagnosis tools. It can even be installed on vehicles that are fitted with anti-theft systems.

Another advantage of the Ghost immobiliser is that your vehicle can only be started by someone who has access to the PIN number and has physical access to your car. This is a big benefit over security systems that can be bypassed with simple cable manipulation, a screwdriver, or the utilisation of a universal remote controller.

You can easily reset your PIN in case you forget it by using the emergency PIN override feature of mobile phones or computers. This is helpful if you need to start your car after it has been left in a garage or by using a valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and is able to be installed by our authorised installers. It has an RFID fingerprint system that allows parts to be identified which will enable the return of stolen parts in the event of their being discovered, and can also be switched into 'service mode', which will allow the engine to start when the vehicle is in a garage or using valet parking services, but you have to enter your PIN code to leave the vehicle.