• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If you have double glazing repair-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need to find some plastic spacers to assist the new pane to fit perfectly into the window frame.

If you are going to try to remove the window panes by yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional comes out to fix the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they can suffer from a variety of problems including sagging. A window that is sagging can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows to access the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you aren't able to move the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen. Often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. The first step is to close the window and then perform an initial test fit. The corners of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk can be applied. When it comes to uPVC repair, it is important to be careful not to over-caulk. This will make your window harder to clean and decrease its energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the home.

It is also important to keep in mind that if the leak originates from the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc repairs windows are stiff to open, or are loose and open with a breeze it could be hinges that are at the fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is simpler with someone else to assist in holding the frame in place.

Make sure that the uPVC hinges are closed and open in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also lower the possibility of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again due to wear and tear may become displaced, which will cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it might be required to realign them. The interlock may be disaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace these.

The seals may wear out or uPVC repair get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be positioned on the top of your windowsill. These will help to keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs windows made of upvc will provide an excellent level of insulation and security for your home. It is important to remember that all windows will eventually get worn out and Upvc Repair it may be cheaper to replace them rather than repair them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as possible.