• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and typically fit into old frames very easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the old panes. In this instance, you will need to find some plastic spacers that help the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards will fall onto the fabric rather than on the floor where they could be trampled upon and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is large, you might be interested in an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and UPVC Window Repairs doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues like sagging. A sagging window can cause problems with light, draughts or even security. It's crucial to act immediately if you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can get at the frame. Then, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close your window and check for fitting. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.

If you aren't able to move the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loose their elasticity. It is important to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wearing out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and then perform an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously might need to be removed before a new layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage occurs between the double glazing-glazed glass, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze It could be hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts, hinges can be damaged over time. It is essentially a very simple procedure, but it is easier to do if you have someone to assist in holding the frame up.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of inadequate installation at the factory. This issue can be fixed by sending us a picture on our website. We will be pleased to offer you suggestions.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also prevent corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges, also because of wear and tear, can become misaligned, this causes a gap to form where the sash meets the frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to have them aligned or replaced. The interlock may also become disaligned. This is located on the hinge side and may need to be cleaned. In some instances it is possible to replace them.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder, these are typically made of fabric which are filled with a sort of filler and can be positioned on top of your windowsill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repairs windows made of upvc will continue to provide excellent insulation and security for your home. However, it is important to recognise that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.