• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It is easy to repair a broken window handle using the appropriate tools. However, it is essential to know your type of handle and the spindle length before buying an alternative.

Older uPVC window handles have a spur that protrudes and locks on the wedge striker for cockspur. They can be left or right-handed and need to be replaced with the same handle.

What kind of lock and handle do I need?

There are many different types of window handles made of upvc and locks, each with their own benefits and purposes. The type of handle you are using will determine the ease to open your windows and if the locking mechanism functions in the way you want it to. As time passes and with regular use, upvc window handles may become damaged or worn out, rendering them less secure and efficient. In some instances, they could even fall off completely. It is essential to fix your window handles made of upvc as soon as you see they are falling off. This will help prevent burglaries and ensure that your home is secure.

It's an easy task that anyone can complete. With a few basic tools and the right information it's a straightforward process that shouldn't take more than a couple minutes. To get started, you will need to identify the type of lock and handle you have on your upvc window to help you identify the best replacement.

Inline Espagnolette Handles

They are typically located on the side of the window. They are flat and come with a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle and into the frame of the window to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are attached to the window frame by one screw, and are less secure than other varieties of window handles.

Handles that can tilt and turn

As opposed to the other handles made of upvc, tilt and turn handles can be turned to open the window and turned inwards to allow to let air flow in. They have a 7mm spindle in the back and are available both in left and right-handed versions.

When you are purchasing replacement sash windows window handle - look at this site, handles for upvc, it is important to verify the length of the spindle as not all are the same size. Drop something into the middle of the hole to check the length. This is the largest spindle size that will fit your windows.

What is the spindle?

uPVC window handles operate similarly to doors. By turning the handle, you can operate a latch within the frame. The latch opens the window, so it can be closed and opened. These handles can be damaged, especially if they're used frequently or subjected to harsh conditions. This can leave you needing to replace your uPVC handles for windows as they may not be able to operate the window correctly for a long time.

There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type uses a different spindle to lock the window mechanism. It is essential to determine the type of handle you have installed on your uPVC windows to ensure that you replace it with the right one.

You can determine the type of uPVC handle you have by inspecting the base of your handle. A snap-in cover is over the screw that holds the base of the handle in position. Remove this and then you should be able see the second holding screw located at the opposite end of the base section of the handle. After both screws are removed you should be able to pull the handle away from the uPVC window.

After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Make note of the length of the spindle as you'll need to make sure that you purchase an alternative that is the same length as the original handle and locking mechanism.

The spindle wears down and is unable to operate the locking mechanism. This could be due to damage from constant use, a loosening of the locking mechanism or even rust over time. If this happens, you'll need to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

Over time and through everyday use, window handles can become damaged or broken and when this happens, it is crucial to repair them as soon as you can to ensure the security of your home. It is simple to replace a worn or damaged handle. The job can be accomplished in under an hour without the need for any special tools.

The first step in removing the handle that was previously used is to take off the screw situated at the top of the base of the handle. Once the screw is removed, the handle will be removed. There will be another screw located at the bottom of the handle's base, and this can be removed too. After the two screws are removed, the handle will be removed from the window's base.

After removing the old handle and align the fixing holes of the new handle with the holes already present in the window frame. There may be a little sticker or caps on the new handle, so take off these if necessary and then screw the handle into the frame. Once the handle is set, it is important to test that it is working by turning the handle and making sure that the lock mechanism activates.

Espag handles come with a spindle which protrudes out of the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows feature blades with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over the frame's outer or transom bar cross-member in the window.

After you have installed the new handle, place the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle is fixed. Now that the handle is ready for use, simply open and close the window a couple of times to ensure it works properly and securely.

How do I put in the new handle?

It's not difficult to change the handle on your windows made of uPVC. The process is simple. You only need an screwdriver and a bit of perseverance. The first thing to do is to ensure that the handle you have previously used is in the unlocked position and then remove any screws that are visible, you can replace them by screw caps if you need. After removing the handle you'll need to take note of the length of the spindle which extends from the back. This is vital as it will determine what kind of handle to purchase.

Espagnolette handles are the most popular type of handle used on uPVC windows. They feature a spindle that is inserted into the handle and operates an internal locking mechanism within the window frame. The handle opens the latch, replacement window handle allowing the window to open. With time and regular use, espagnolette handles may become damaged or impaired and it is necessary to find replacements.

Cadenza handles are another type of uPVC window handle commonly used on tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism within the window. They are usually more secure than handles made of espagnolette because they are only accessible from the inside. They can be replaced by the same procedure as espagnolette handles however you must ensure that the new handle has a curved blade instead of a flat one.

After you have chosen the correct handle, simply align the new handle with the existing screw holes before screwing it in place. Then, you should put the screws on and test the new handle. You can do this by dragging the handle back and forth from the locked position to the unlocked one a few time. It may be worth contacting an expert to see if you can resolve any issues. They can often advise you on the best way to solve the issue in a speedy and effective way.