• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

It is important to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. However, if you have double-pane windows that are held in place by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need find some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.

If you plan to try to remove the window panes by yourself it is important to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the cloth instead of onto the floor, where they could be trampled on and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and fix the window. This will also provide an obstacle to stop intruders from getting into your home. If the distance between the window and the door is substantial, you may want to use a security screen that also has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they can suffer from a variety of problems including sliding. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows to access the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and become dry, which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and uPVC window repairs damp walls each time it rains it's important to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

This is a fairly simple fix that can be done by any DIY expert. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk can be applied. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them and that the sill pan is angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window replacement. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the problem is related to the seal, not the frame. This can be easily repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with a breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Like all mechanical parts, hinges can wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's simpler when you have a person to assist in holding the frame up.

Check that the uPVC hinges are open and closed in the proper direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The issue can be caused by opening the window improperly or by a poor installation at the factory. This issue can be fixed by sending us a picture on our website. We will be more than happy to give you advice.

It is also crucial to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again due to wear and tear can become misaligned, this causes an opening to appear where the sash meets the frame. These can be easily fixed by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it may be feasible to give them a clean but in some instances it could be necessary to have them replaced.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the risk of draughts.

Lastly, one of the most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric filled with some type of filler. They can be placed on top of your windowsill. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a lifespan and they may reach an point at which it is more economical to replace them than fix them. So, if you are having issues with your upvc windows, it is best to seek professional assistance as soon as possible.