• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Protects your vehicle from key cloning and prevents thieves from driving it with the keys you originally had. Our latest immobiliser connects to your vehicles CAN data network & an individual PIN code has to be entered for the engine to begin.

Contrary to trackers Ghost doesn't transmit any radio frequency signals and cannot be detected with diagnostic tools. It also has no LED indicators or buttons that can give away its presence within your van or car.

Anti-key cloning

The Ghost immobiliser was designed to stop key cloning. This device connects to the CAN data network of your vehicle and creates a unique pin code push sequence using the buttons from the factory on your dashboard and steering wheel. This prevents the thief from being capable of starting your car. If the wrong PIN is entered, it will stop your engine from starting, making it impossible to leave with your joy and pride.

ghost immobiliser price immobilisers are new technology that is extremely hard for thieves to defeat. The ghost immobiliser is different from physical deterrents such as wheel locks and steering locks that can be cut, is a discrete electronic device. It's not even recognized by thieves as it doesn't emit radio signals and is operated in a silent manner.

This next-generation immobiliser will protect your vehicle from a range of threats, including key hacking relay attacks, key hacking and copied copies. It also stops the thief from adding a key or replacing your ECU because it won't permit them to start the vehicle without entering the correct PIN code.

In contrast to other immobilisers the ghost immobiliser 2 does NOT require a remote or key fobs in order to operate. It can be turned off via the driver's mobile using a simple app. This is perfect for the time you have to give your car away for valet parking, or servicing without the key fobs.

The Autowatch Ghost Immobiliser Fitting Ghost-II is the latest evolution of our ground-breaking ghost immobiliser. It was designed to be as easy and convenient to use as it is possible, while remaining as secure as ever. This is achieved by integrating the Ghost-II with the vehicle's CAN data network. This means that there are no wires that are able to be hidden or easily discovered. It also has an integrated feature that allows you to disable your Ghost-II by connecting to the vehicle's Bluetooth and you'll be able to go out and drive with no hassle.

OBD port hacking

OBD port hacking is a new technique being used by professional car thieves to steal vehicles. Thieves have access to your vehicle's OBD port with nothing more than a laptop, an application and a few cables which can be purchased online for under PS50. Once they have access to your vehicle's OBD port, they are able to do whatever they want including setting fault codes, autowatch Ghost immobiliser Fitting and tuning your car to taking away your pride and joy in under a minute.

It can prevent your car from being taken away by requiring a unique PIN sequence to be entered along with your key fob before you can start the engine or drive away. It does this by interacting with the vehicles ECU (Engine Control Unit) on the CAN Data circuit, and is completely undetectable to any code grabbing or RF scanning technology. It even includes a Service/Valet mode that will allow your vehicle to be started without the need for a PIN code.

To utilize an OBD hacking device you must have a laptop that has software capable of reading the OBD protocol. These can be purchased for under PS100 on ebay or Amazon. Also, you will require a cable with OBD pins that are connected to the CAN Bus. These cables can be purchased at Amazon or Ebay for around PS50. You then need to splice the cable into the wire harness of your car for example, the radio wiring harness.

Once the hacker gains access to the OBD port of your vehicle, they will send diagnostics to the system using high baud rate, which will crash the car's CAN, and prevent the systems from working. This could cause your car's engine to stop or lock up.

There is no need for additional remotes or key fobs

A car immobiliser is a fantastic piece of anti-theft technology that is used by millions of modern vehicles around the globe. An aftermarket immobiliser safeguards your vehicle by using engine ECU software that stops vehicles from starting when an untrue transponder signal is sent.

However, it could be simple for a burglar to get around an immobiliser system if they have access to the code that allows them to disable it. The battery inside most key fobs is easily removed by prying it open, so a thief can employ a simple tool remove the immobiliser's inner circuit board and replace it with the blank. Then, they will be able to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is done through a discrete, silent data loop in CAN that is not detected by diagnostic tools such as the ones used by high-tech thieves. It does not also use a traditional key-fob with LED indicators, which means it can go undetected in plain sight.

You may have to turn off Autowatch's ghost immobiliser fitting 2 protection at certain times, such as during valet parking or during a service. Ghost CAN immobilisers feature a mode called "Service Mode,' which you can activate with a simple push of a phone button. The car can still be operated however its maximum speed will be restricted to 36mph for greater security.

Contact us today to arrange an appointment for a demonstration in our workshop. A member of our team will explain how the system works, and give you your Ghost 2 emergency card, installation certificate, and security assurance.

Simple PIN code change process

Ghost is the latest generation of device that protects your vehicle without cutting wires or installing key fobs from an aftermarket. It connects directly to the vehicle's CAN data network, and a personal PIN code is programmed into it via buttons on your steering wheel and dash. The device doesn't emit RF signals, which means it is not able to be tampered with. This makes it unrecognisable by sophisticated RF scanning or code grabbing technologies that modern thieves use.

The PIN code sequence can be altered anytime you want to lock out prior drivers, and it even has an override code incase of a sequence that is not remembered. The installer will demonstrate the procedure to accomplish this during installation. The system also has the option of a valet mode that can be used to temporarily disable the pin input sequence so that your mechanic or garage can repair the car without having to know the code. This is ideal for those who want to hand over their car to valet parking / service but still don't want to divulge the PIN sequence.

In contrast to Thatcham products which require additional key fobs to operate, Ghost is a discreet system that uses the buttons on your car to create an unique and interchangeable PIN code sequence. The sequence is entered via the app for smartphones, meaning that no additional LEDs are being thrown, and your vehicle is secure and safe from the possibility of being disabled by hackers or any other technology.

Every vehicle is tested

A ghost immobiliser, in contrast to key fobs that require pressing buttons, is discretely installed under the steering wheel or dash. You won't even know it's there. The device is connected to the CAN network of your vehicle and a PIN code can be programmed using the buttons on your vehicle. The system won't permit your car to start until the code is entered. This means that thieves are unable to duplicate your keys or gain access to the OBD port to hack your vehicle.

Ghost can be utilized in all vehicles that use electric vehicles, vans, motorhomes and bicycles. It's also incredibly versatile and can be programmed to shut down in various scenarios. For example, it can be programmed to enter Valet mode when the vehicle is being transported to a valet parking or servicing company. This means that your car can be operated within a specified 30mph speed limit, and the ghost immobiliser will be activated once it is returned to your home.

The device can be reset at any time using your personal PIN number. This is helpful when you forget the code or the device is inoperable, meaning that it's effectively like new.

It's also important to note that the device is unnoticeable to anyone who isn't familiar with it. It does this by analyzing the buttons on your steering wheel and dashboard and then using the information it sends to identify the button that was hit. This makes it a secure and solid security system that is not able to be altered by RF scanning or jamming, or even a door lock pick set.