• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

Replacing a broken window handle is a relatively easy process, and with the right tools it can be done quite quickly. But it's essential to know the type of handle and its spindle's length prior buying the replacement.

Older uPVC window handles have a spur that protrudes and locks over the wedge striker. These can be right-handed or left-handed and must be compatible when replaced.

What kind of lock and handle do I have?

There are a variety of upvc window locks and handles each with its particular advantages and uses. The kind of handle you choose will determine how easy it is to open your windows and whether or not the locking mechanism works as intended. Over time, and with regular use the upvc handles that are on your windows can be damaged and worn out. This makes them less secure and less effective. In some cases they could even fall off completely. It is crucial to fix the handles on your window made of upvc as soon as you begin to notice they are falling off. This will help to stop potential burglaries and keep your home safe.

It's a task that almost anyone can do. With a few basic tools and the proper knowledge it's a simple procedure that should take no less than a few minutes. To get started you must determine the type of handle and lock you have on your upvc sash window replacement, which will help you identify the best replacement.

Inline Espagnolette Handles

These are the most commonly used kind of upvc handle and are typically located on the side of your window. They are flat and feature an opening that engages the locking mechanism of the window frame. Inline upvc handles have a spindle running through the middle of the handle and into the window frame to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are secured to the frame of the window with a single screw and are less secure than other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other handles made of upvc in that they can be rotated for opening the window, and then tilted into the window to ventilate. They have a 7mm spindle at the back and are available in right-hand and left-hand versions.

It is essential to know the spindle size when buying replacement handles made of upvc. There are a few that are exactly the same size. Drop something into the middle of the hole to measure the length. This is the maximum spindle size that will fit in your windows.

What is the spindle?

uPVC window handles work in a similar way as doors, with the user turning the handle to operate a latch inside the frame. The window then opens and shut. The handles can become damaged, especially if often used or are exposed to harsh conditions. It is possible to replace the handles on your uPVC window if they're not functioning properly.

There are a variety of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed to fit inside the uPVC frames in different ways, and each type of handle utilizes a specific spindle to lock the mechanism fitted into the window. This is why it is important to know what kind of handle you have installed on your uPVC window to find the right replacement for it.

The base of the handle will inform the type of uPVC it is. A snap-in cover should be over the screw that holds the handle's base in place. When you remove this cover and you'll be able to see the screw that holds the base of the handle in position. After both screws have been removed, you should be able take the handle out of the uPVC.

After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Be sure to note the length of the spindle since you'll need to ensure that you purchase an alternative that is the same length as your original handle and locking mechanism.

The primary issue with window handles made of uPVC is that the spindle gets worn out and cannot longer function properly with the locking mechanism. This can be caused by corrosion, damage from frequent use, or a loosening locking mechanism. If this happens, it is necessary to replace the window handle and the locking mechanism to restore the full functionality to your uPVC windows.

How do I remove my old handle?

Over time and through everyday usage, window handles could become damaged or broken, and when this happens, it is essential to fix them as soon as possible to ensure the security of your home. Fortunately, replacing a worn or UPVC Window Handle Replacement damaged handle is a relatively simple job that can be completed in just over an hour and doesn't require any special tools.

The first step in removing the handle that was previously used is to remove the screw situated on the top of the base of the handle. Once this is removed the handle will be removed from the base. Another screw will be located at the bottom of the handle. This can also be removed. After the two screws are removed, the handle will be removed from the window's base.

After removing the old handle, align the fixing holes of the new handle to the holes that are already in the window frame. There may be a little sticker or caps on the new handle, so remove them if needed and then screw the handle in place. It is important to check that the handle is working after it is put in place. Turn the handle over and ensure that the lock mechanism is working.

Espag handles have spindles that protrude from the handle and slots into the multipoint locking mechanism of the frame of the window. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism while Cockspur handles have an extended nose that hangs over either the frame's outer or transom bar cross member within the window.

Once you have the new handle in place, insert the spindle inside the window lock and then tighten it down. Replace the snap-in cover and screw cap (if applicable) once the handle is securely fixed. Now that the handle is in use, open and close the window a few times to make sure it is working correctly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't a big deal and the process is simple. All you require is a screwdriver and a small amount of patience. First, ensure that the handle is not locked. Then remove any screws that are visible. You could also replace them with screw caps. Once the handle is removed, you need to make an outline of the length of the spindle that protrudes from the back of the handle. This is crucial as it will determine what type of handle you need to buy.

Espagnolette handles are the most common type of handle used on uPVC windows. The spindle passes through the handle to operate the locking mechanism inside the window frame. The handle opens the latch, allowing the window to open. In regular use and over time, handles for espagnolette may become damaged.

Cadenza handles are a type of upvc window handle replacement handle that is typically used with tilt and turn windows. They feature a protruding blade that operates a multiple-point locking mechanism within the window. They are generally more secure than espagnolette handles since they are only accessible from the inside. You can replace them using the same procedure as you would do for handles made of espagnolette however, ensure that the new handle is angled, not flat.

After you have chosen the correct handle, you can align the new handle with the existing screw holes before screwing it into place. After that, you should put the screws back on and make sure the new handle functions properly. This is done by moving the handle from locked to the unlocked position and the reverse direction several times. It might be worthwhile to speak with an expert to determine if you can resolve any issues. They can advise you on how to fix the issue in a timely and effective way.